|
TOOLS
|
|
|
GLOW PLUG TAP |
|
|
|
Glow Plugs have the uncommon 1/4-32 thread. The USA's largest
threading tool manufacturer makes these reasonably priced taps and dies for
us. The tap cleans fouled threads in a cylinder head. The die serves a very
important function. Glow plugs are often improperly threaded by the factory
and installing one ruins an engine's head. Rethreading all plugs with our die
eliminates the problem. A 1/4-32 die is much less expensive than a head,
especially one from a four-stroke engine. Catalog Number
1/4-32 Die - GPD032 |
|
TAP-N-DRILL GUIDES |
|
|
|
Even experienced modelers have difficulty drilling and tapping holes
for wing bolts, and a motor mount presents an even greater challenge. Our
Tap-N-Drill Guides make these operations simple. We included "modeling
size" holes for the taps and drills you use most. Click here to see some how-tos. The three-piece set handles common drills from 1/16" to
1/4" and all taps and tap drills from 2-56 through 1/4". Catalog Num TND001 ……… all taps and tap drills 0-80 to 6-32 Catalog Num
TND002 ………. all taps and tap drills 8-32 to 1/4" Catalog Num TND003
………….… fractional drills 1/16” to 1/4” Catalog Num TND011 ………………………… set of all three |
|
AIRCRAFT DRILLS |
|
|
|
Aircraft drills are like any other drill only much longer. Ours are
cobalt high-speed steel, and modeling applications will never dull them.
These drills reach far into your model and are great for putting in a
forgotten hole. The 5/32" clears
a 6-32 screw. The 3/16" finds applications for control cable tubes. The
hard to find 15/64" x 12" is the exact size of medium fuel line. Size
5/32" x 6 Catalog Number ……............. ACD532 |
|
Tools Page 1
| Tools Page 2 |
|
