LeRoy’s Easy Hinger
Tools | Main Menu U Bend | Zee Bend Bending Landing Gear Wire | Bending Hard Brass Tubing Motor Mount Drill Bushing Kit Tap-N-Drill Guide | Wing Bolt Guide Jim’s Film Trimmer
	All your hinges will be installed uncocked and exactly on the hinge line. LeROY’S EASY HINGER is the only tool specifically designed for CA instant glue hinges. Our hinger is machined from aluminum - not cheap plastic, and uses common number eleven hobby knife blades. Modelers who have tried LeRoy’s Easy Hinger tell us they would never use any other hinge and tool combination again.
	Playing cards space the work piece so the hinge line and knife blade are in line.
	Cut one edge of the hinge slot by pushing the single bladed hinger.
	Turn the tool over and cut the other side of the slot.
	Now, use the two bladed hinger to form the slot’s center section.
	Lastly, combine the three cuts by moving the single bladed hinger through the slot. Note: always move the tool away from your hand.
	It’s that simple, and the slots will be exactly in a straight line
Tools | Main Menu U Bend | Zee Bend Bending Landing Gear Wire | Bending Hard Brass Tubing Motor Mount Drill Bushing Kit Tap-N-Drill Guide | Wing Bolt Guide Jim’s Film Trimmer